FlexLink M5 T-Connector, Connecting Component, Strut Profile 44 x 48 mm, Groove Size 11 mm, Round Tube Size 12 mm

RS kataloški broj:: 289-9026robna marka: FlexLinkProizvođački broj:: XCEC 12
brand-logo
Prikaži sve u Connecting Components

Tehnička dokumentacija

Tehnički podaci

Proizvođač

FlexLink

Product Type

Connecting Component

Connector Type

T-Connector

Compatible Groove Size

11 mm

Compatible Strut Profile

44 x 48 mm

Thread Size

M5

Material

Steel

Structural Element Type

Beam

Length

23.5mm

Compatible Tube Size

12 mm

Product System

XC

Standards/Approvals

No

Zemlja podrijetla

Sweden

Detalji o proizvodu

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.

Informacije o stanju skladišta trenutno nisu dostupne.

€ 5,48

€ 5,48 komadno (bez PDV-a)

€ 6,85

€ 6,85 komadno (s PDV-om)

FlexLink M5 T-Connector, Connecting Component, Strut Profile 44 x 48 mm, Groove Size 11 mm, Round Tube Size 12 mm

€ 5,48

€ 5,48 komadno (bez PDV-a)

€ 6,85

€ 6,85 komadno (s PDV-om)

FlexLink M5 T-Connector, Connecting Component, Strut Profile 44 x 48 mm, Groove Size 11 mm, Round Tube Size 12 mm

Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Proizvođač

FlexLink

Product Type

Connecting Component

Connector Type

T-Connector

Compatible Groove Size

11 mm

Compatible Strut Profile

44 x 48 mm

Thread Size

M5

Material

Steel

Structural Element Type

Beam

Length

23.5mm

Compatible Tube Size

12 mm

Product System

XC

Standards/Approvals

No

Zemlja podrijetla

Sweden

Detalji o proizvodu

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.