Tehnička dokumentacija
Tehnički podaci
Proizvođač
FlukeVoltage
1, 600kV
Product Type
Test Probe
Current
10A
Boja
Red, Black
Tip Size
2 mm
Tip Material
Stainless Steel
Probe Socket Diameter
2mm
Standards/Approvals
UL
Zemlja podrijetla
China
Detalji o proizvodu
Are you looking for a hassle-free way to test electrical circuits in tight work areas? Grab a pair of these FLUKE test probes. Attach them to your multimeter and use their 2mm tip width to squeeze into hard-to-reach spaces, such as recesses and closely spaced terminals. Thanks to their needle design, these components pinpoint the energy source to ensure accurate measurement of many values, including voltage, resistance, current and temperature. The stainless-steel tips fend off rust to keep your probes functioning in humid environments.
Yes. As these test probes have CAT III 1000V and CAT IV 600V safety ratings, they withstand impulse voltages of up to 8000V to provide your system with additional electrical protection.
Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
CATII 1000V
Informacije o stanju skladišta trenutno nisu dostupne.
€ 43,84
€ 43,84 komadno (bez PDV-a)
1
€ 43,84
€ 43,84 komadno (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
FlukeVoltage
1, 600kV
Product Type
Test Probe
Current
10A
Boja
Red, Black
Tip Size
2 mm
Tip Material
Stainless Steel
Probe Socket Diameter
2mm
Standards/Approvals
UL
Zemlja podrijetla
China
Detalji o proizvodu
Are you looking for a hassle-free way to test electrical circuits in tight work areas? Grab a pair of these FLUKE test probes. Attach them to your multimeter and use their 2mm tip width to squeeze into hard-to-reach spaces, such as recesses and closely spaced terminals. Thanks to their needle design, these components pinpoint the energy source to ensure accurate measurement of many values, including voltage, resistance, current and temperature. The stainless-steel tips fend off rust to keep your probes functioning in humid environments.
Yes. As these test probes have CAT III 1000V and CAT IV 600V safety ratings, they withstand impulse voltages of up to 8000V to provide your system with additional electrical protection.
Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
CATII 1000V
