Tehnička dokumentacija
Tehnički podaci
Proizvođač
LittelfuseProduct Type
Panel Mount Fuse Cover
Series
816
Compatible Fuse Size
6.3 x 32 mm
Fuse Holder Mount Type
Flush
Length
33.8mm
Height
33.8mm
Cover Material
Polyamide
Standards/Approvals
UL, CSA
IP Rating
IP64, IP40
For Use With
6.3 x 32 mm Fuse
Detalji o proizvodu
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements.
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Caps supplied separately
Informacije o stanju skladišta trenutno nisu dostupne.
€ 17,40
€ 3,48 komadno (u pakiranju od 5) (bez PDV-a)
5
€ 17,40
€ 3,48 komadno (u pakiranju od 5) (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
5
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 5 - 20 | € 3,48 | € 17,40 |
| 25 - 45 | € 3,35 | € 16,75 |
| 50 - 120 | € 3,33 | € 16,65 |
| 125 - 245 | € 3,28 | € 16,40 |
| 250+ | € 3,22 | € 16,10 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
LittelfuseProduct Type
Panel Mount Fuse Cover
Series
816
Compatible Fuse Size
6.3 x 32 mm
Fuse Holder Mount Type
Flush
Length
33.8mm
Height
33.8mm
Cover Material
Polyamide
Standards/Approvals
UL, CSA
IP Rating
IP64, IP40
For Use With
6.3 x 32 mm Fuse
Detalji o proizvodu
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements.
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Caps supplied separately
