Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipMemory Size
256kB
Product Type
EEPROM
Interface Type
Serial-SPI
Package Type
SOIC
Mount Type
Through Hole
Pin Count
8
Maximum Clock Frequency
10MHz
Organisation
32K x 8 Bit
Minimum Supply Voltage
1.8V
Number of Bits per Word
8
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Length
9.4mm
Standards/Approvals
No
Width
6.4mm
Data Retention
200year
Supply Current
6mA
Maximum Random Access Time
50ns
Automotive Standard
AEC-Q100
Number of Words
32k
Detalji o proizvodu
Microchip 25AA256-I/P are 256 Kbit Serial Electrically Erasable PROMs. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input. Communication to the device can be paused via the hold pin (HOLD).
Informacije o stanju skladišta trenutno nisu dostupne.
€ 136,80
€ 2,28 komadno (u cijevi od 60) (bez PDV-a)
60
€ 136,80
€ 2,28 komadno (u cijevi od 60) (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
60
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipMemory Size
256kB
Product Type
EEPROM
Interface Type
Serial-SPI
Package Type
SOIC
Mount Type
Through Hole
Pin Count
8
Maximum Clock Frequency
10MHz
Organisation
32K x 8 Bit
Minimum Supply Voltage
1.8V
Number of Bits per Word
8
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Length
9.4mm
Standards/Approvals
No
Width
6.4mm
Data Retention
200year
Supply Current
6mA
Maximum Random Access Time
50ns
Automotive Standard
AEC-Q100
Number of Words
32k
Detalji o proizvodu
Microchip 25AA256-I/P are 256 Kbit Serial Electrically Erasable PROMs. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input. Communication to the device can be paused via the hold pin (HOLD).