Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipProduct Type
Analogue Switch
Logic Family
CMOS
Pin Count
48
Number of Elements per Chip
1
Mount Type
Surface
Minimum Supply Voltage
4.5V
Package Type
LQFP
Maximum Supply Voltage
6.3V
Maximum On State Resistance
23Ω
Minimum Operating Temperature
0°C
Multiplexer/Demultiplexer
Multiplexer
Maximum Operating Temperature
70°C
Length
7mm
Height
1mm
Standards/Approvals
RoHS
Series
HV2707
Automotive Standard
No
Detalji o proizvodu
The Microchip HV2707 device is a low harmonic distortion, low charge injection, 16-channel, high voltage analogue switch without high-voltage supplies. It is intended for use in applications requiring high-voltage switching controlled by low-voltage control signals, such as medical ultrasound imaging, driving piezoelectric transducers and printers. The device requires only +5V or +6V bias supply.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 19.990,00
€ 19,99 Each (On a Reel of 1000) (bez PDV-a)
€ 24.987,50
€ 24,988 Each (On a Reel of 1000) (s PDV-om)
1000
€ 19.990,00
€ 19,99 Each (On a Reel of 1000) (bez PDV-a)
€ 24.987,50
€ 24,988 Each (On a Reel of 1000) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1000
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipProduct Type
Analogue Switch
Logic Family
CMOS
Pin Count
48
Number of Elements per Chip
1
Mount Type
Surface
Minimum Supply Voltage
4.5V
Package Type
LQFP
Maximum Supply Voltage
6.3V
Maximum On State Resistance
23Ω
Minimum Operating Temperature
0°C
Multiplexer/Demultiplexer
Multiplexer
Maximum Operating Temperature
70°C
Length
7mm
Height
1mm
Standards/Approvals
RoHS
Series
HV2707
Automotive Standard
No
Detalji o proizvodu
The Microchip HV2707 device is a low harmonic distortion, low charge injection, 16-channel, high voltage analogue switch without high-voltage supplies. It is intended for use in applications requiring high-voltage switching controlled by low-voltage control signals, such as medical ultrasound imaging, driving piezoelectric transducers and printers. The device requires only +5V or +6V bias supply.