Microchip Digital Potentiometer 257-Position 5 kΩ Linear 2-Channel 8-Pin PDIP
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipProduct Type
Digital Potentiometer
Number of Positions
257
Resistance
5kΩ
Taper Type
Linear
Memory Type
Non-Volatile
Temperature Coefficient
150 ppm/°C
Number of Pots per Package
2
Interface Type
Serial-SPI
Mount Type
Through Hole
Package Type
PDIP
Minimum Supply Voltage
1.8V
Pin Count
8
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Width
177.8 mm
Height
4.95mm
Length
10.16mm
Standards/Approvals
No
Series
MCP4261
Automotive Standard
No
Detalji o proizvodu
MCP414x/416x/424x/426x Digital Potentiometers
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.
Featured is WiperLock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.
7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.
Digital Potentiometer - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 3,78
€ 1,89 komadno (u pakiranju od 2) (bez PDV-a)
€ 4,72
€ 2,362 komadno (u pakiranju od 2) (s PDV-om)
Standard
2
€ 3,78
€ 1,89 komadno (u pakiranju od 2) (bez PDV-a)
€ 4,72
€ 2,362 komadno (u pakiranju od 2) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Standard
2
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 2 - 8 | € 1,89 | € 3,78 |
| 10+ | € 1,87 | € 3,74 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MicrochipProduct Type
Digital Potentiometer
Number of Positions
257
Resistance
5kΩ
Taper Type
Linear
Memory Type
Non-Volatile
Temperature Coefficient
150 ppm/°C
Number of Pots per Package
2
Interface Type
Serial-SPI
Mount Type
Through Hole
Package Type
PDIP
Minimum Supply Voltage
1.8V
Pin Count
8
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Width
177.8 mm
Height
4.95mm
Length
10.16mm
Standards/Approvals
No
Series
MCP4261
Automotive Standard
No
Detalji o proizvodu
MCP414x/416x/424x/426x Digital Potentiometers
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.
Featured is WiperLock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.
7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.
Digital Potentiometer - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda