Tehnička dokumentacija
Tehnički podaci
Proizvođač
MurataProduct Type
LoRa Module
Maximum Output Power
10dBm
Receiver Sensitivity
-135dBm
Protocol Type
LoraWAN
Supported Bus Interfaces
SPI, UART, GPIO, ADC, I2C
Minimum Supply Voltage
2.2V
Maximum Supply Voltage
3.6V
Standards/Approvals
RoHS
Zemlja podrijetla
China
Detalji o proizvodu
The Murata new, compact, low cost, low power wide area network (LPWAN) wireless module that supports the LoRaWAN long range wireless protocol. This new stand-alone module measures just 12.5 x 11.6 x 1.76 mm, is constructed in a metal shielded package and comprises a Semtech SX1276 ultra long range spread spectrum wireless transceiver and an STMicro STM32L0 series ARM Cortex-M0+ 32 bit microcontroller (MCU). The normal output power is +14 dBm but a PA boost function can be selected to increase RF output to +20 dBm for long range applications or those where the end-device is sited in a poor signal location indoors. The MCU includes 192 kB flash and 20 kB RAM, and has enough memory to embed customer applications and host other modulation stacks.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 11.308,68
€ 11.308,68 1 Reel of 1000 (bez PDV-a)
1
€ 11.308,68
€ 11.308,68 1 Reel of 1000 (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MurataProduct Type
LoRa Module
Maximum Output Power
10dBm
Receiver Sensitivity
-135dBm
Protocol Type
LoraWAN
Supported Bus Interfaces
SPI, UART, GPIO, ADC, I2C
Minimum Supply Voltage
2.2V
Maximum Supply Voltage
3.6V
Standards/Approvals
RoHS
Zemlja podrijetla
China
Detalji o proizvodu
The Murata new, compact, low cost, low power wide area network (LPWAN) wireless module that supports the LoRaWAN long range wireless protocol. This new stand-alone module measures just 12.5 x 11.6 x 1.76 mm, is constructed in a metal shielded package and comprises a Semtech SX1276 ultra long range spread spectrum wireless transceiver and an STMicro STM32L0 series ARM Cortex-M0+ 32 bit microcontroller (MCU). The normal output power is +14 dBm but a PA boost function can be selected to increase RF output to +20 dBm for long range applications or those where the end-device is sited in a poor signal location indoors. The MCU includes 192 kB flash and 20 kB RAM, and has enough memory to embed customer applications and host other modulation stacks.