Optek Screw Reflective Optical Sensor, Phototransistor Output 1-Channel
Tehnička dokumentacija
Tehnički podaci
Proizvođač
OptekProduct Type
Reflective Optical Sensor
Peak Sensor Distance
6.35mm
Output Device
Phototransistor
Number of Channels
1
Number of Pins
4
Mount Type
Screw
Width
7.62 mm
Length
24in
Height
13.34mm
Standards/Approvals
RoHS
Output Signal Type
Analogue
Maximum Operating Temperature
85°C
Minimum Operating Temperature
-40°C
Automotive Standard
No
Detalji o proizvodu
Tube Liquid Sensor
The OPB350 series liquid sensor is designed to work with 3.2mm (1/8 inch) and 6.3mm (1/4 inch) outside diameter clear tubes. Used in conjunction with suitably designed output reference circuitry, output states such as "fluid present", "no fluid present" and "no tube present" can be recognised. Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the liquid present and no liquid states. If no liquid is present, the phototransistor sinks only a small amount of current. If no tube is present, the phototransistor sinks a larger current than in the no liquid state.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 9,46
€ 9,46 komadno (bez PDV-a)
€ 11,82
€ 11,82 komadno (s PDV-om)
1
€ 9,46
€ 9,46 komadno (bez PDV-a)
€ 11,82
€ 11,82 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 9 | € 9,46 |
| 10+ | € 9,32 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
OptekProduct Type
Reflective Optical Sensor
Peak Sensor Distance
6.35mm
Output Device
Phototransistor
Number of Channels
1
Number of Pins
4
Mount Type
Screw
Width
7.62 mm
Length
24in
Height
13.34mm
Standards/Approvals
RoHS
Output Signal Type
Analogue
Maximum Operating Temperature
85°C
Minimum Operating Temperature
-40°C
Automotive Standard
No
Detalji o proizvodu
Tube Liquid Sensor
The OPB350 series liquid sensor is designed to work with 3.2mm (1/8 inch) and 6.3mm (1/4 inch) outside diameter clear tubes. Used in conjunction with suitably designed output reference circuitry, output states such as "fluid present", "no fluid present" and "no tube present" can be recognised. Clear liquid present causes the phototransistor to sink the maximum current, while dark liquid present causes it to sink the minimum current. As bubbles pass through the tube, the signal will vary between the liquid present and no liquid states. If no liquid is present, the phototransistor sinks only a small amount of current. If no tube is present, the phototransistor sinks a larger current than in the no liquid state.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda