OPB680 Optek Through Hole Slotted Optical Switch, Phototransistor Output
Tehnička dokumentacija
Tehnički podaci
Proizvođač
OptekProduct Type
Slotted Optical Switch
Output Device
Phototransistor
Number of Channels
1
Mount Type
Through Hole
Package Type
Pin
Number of Pins
4
Maximum Operating Temperature
100°C
Minimum Operating Temperature
-40°C
Slot Width
6.86mm
Width
6.86 mm
Length
12.19mm
Height
8.89mm
Standards/Approvals
No
Automotive Standard
No
Series
OPB680
Zemlja podrijetla
Mexico
Detalji o proizvodu
OPB680 Series Slotted Optical Switches
The OPB680 slotted optical flag switches, from Optek Technology, are designed for PCB mounting. They consist of an NPN phototransistor and an IR LED within a black plastic housing. They have an enhanced low current roll-off which improves the contrast ratio and block out ambient light.
The light beam can be interrupted using the arm (flag), switching the transistor output between states that can readily drive logic gates.
Slotted Optical Switches, Optek Technology
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 4,73
€ 4,73 komadno (bez PDV-a)
€ 5,91
€ 5,91 komadno (s PDV-om)
1
€ 4,73
€ 4,73 komadno (bez PDV-a)
€ 5,91
€ 5,91 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 9 | € 4,73 |
| 10 - 24 | € 4,55 |
| 25+ | € 4,52 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
OptekProduct Type
Slotted Optical Switch
Output Device
Phototransistor
Number of Channels
1
Mount Type
Through Hole
Package Type
Pin
Number of Pins
4
Maximum Operating Temperature
100°C
Minimum Operating Temperature
-40°C
Slot Width
6.86mm
Width
6.86 mm
Length
12.19mm
Height
8.89mm
Standards/Approvals
No
Automotive Standard
No
Series
OPB680
Zemlja podrijetla
Mexico
Detalji o proizvodu
OPB680 Series Slotted Optical Switches
The OPB680 slotted optical flag switches, from Optek Technology, are designed for PCB mounting. They consist of an NPN phototransistor and an IR LED within a black plastic housing. They have an enhanced low current roll-off which improves the contrast ratio and block out ambient light.
The light beam can be interrupted using the arm (flag), switching the transistor output between states that can readily drive logic gates.
Slotted Optical Switches, Optek Technology
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda