Pico Technology PicoConnect Series 441 Oscilloscope Probe, Differential Type, 15 MHz, 1:1, D9 Connector
Tehnička dokumentacija
Tehnički podaci
Proizvođač
pico TechnologyProduct Type
Oscilloscope Probe
Probe Type
Differential
Attenuation
1:1
Bandwidth
15MHz
Maximum Common Mode Input Voltage
50V
Connector Type
D9
Model Number
441
Number of Probes
1
Safety Category Level
CAT III
Safety Category Voltage
1000V
Series
PicoConnect
Standards/Approvals
EN 61010-1:2010
Detalji o proizvodu
PicoConnect 441 1:1 Differential Probe
The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth, for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana leads, so is compatible with a wide range of test probes. It comes with a pair of sprung hook probes.
This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.
Pico PC Based Instruments
Informacije o stanju skladišta trenutno nisu dostupne.
€ 55,78
€ 55,78 komadno (bez PDV-a)
€ 69,72
€ 69,72 komadno (s PDV-om)
1
€ 55,78
€ 55,78 komadno (bez PDV-a)
€ 69,72
€ 69,72 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
pico TechnologyProduct Type
Oscilloscope Probe
Probe Type
Differential
Attenuation
1:1
Bandwidth
15MHz
Maximum Common Mode Input Voltage
50V
Connector Type
D9
Model Number
441
Number of Probes
1
Safety Category Level
CAT III
Safety Category Voltage
1000V
Series
PicoConnect
Standards/Approvals
EN 61010-1:2010
Detalji o proizvodu
PicoConnect 441 1:1 Differential Probe
The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth, for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana leads, so is compatible with a wide range of test probes. It comes with a pair of sprung hook probes.
This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.