Tehnička dokumentacija
Tehnički podaci
Proizvođač
PR ElectronicsProduct Type
Frequency/Current Converter
Input Signal Type
Frequency
Output Signal Type
Current
Input Range
0.001 → 100000 Hz
Isolation
2.5kV ac
Output Range
0 → 0.023 A
Supply Voltage
16.8, 31.2V
Hazardous Area Certification
ATEX
Mount Type
DIN Rail
Maximum Operating Temperature
70°C
Minimum Operating Temperature
-25°C
Terminal Type
Screw
IP Rating
IP20
Signal Conditioner Type
Frequency to Current
Standards/Approvals
CE, RoHS
Series
3225
Zemlja podrijetla
Denmark
Detalji o proizvodu
The PR Electronics Universal Frequency Converter units can be mounted side by side, horizontally and vertically, without air gap on a standard DIN rail, even at 70°C ambient temperature. All programming can be password protected. All terminals are over-voltage protected, polarity protected and short-circuit protected. The device is provided with field wiring terminals and shall be supplied from a power supply having double / reinforced. Insulation. a power switch should be easily accessible and close to the device. the power switch shall be marked as the disconnecting unit for the device.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 336,47
€ 336,47 komadno (bez PDV-a)
€ 420,59
€ 420,59 komadno (s PDV-om)
1
€ 336,47
€ 336,47 komadno (bez PDV-a)
€ 420,59
€ 420,59 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
PR ElectronicsProduct Type
Frequency/Current Converter
Input Signal Type
Frequency
Output Signal Type
Current
Input Range
0.001 → 100000 Hz
Isolation
2.5kV ac
Output Range
0 → 0.023 A
Supply Voltage
16.8, 31.2V
Hazardous Area Certification
ATEX
Mount Type
DIN Rail
Maximum Operating Temperature
70°C
Minimum Operating Temperature
-25°C
Terminal Type
Screw
IP Rating
IP20
Signal Conditioner Type
Frequency to Current
Standards/Approvals
CE, RoHS
Series
3225
Zemlja podrijetla
Denmark
Detalji o proizvodu
The PR Electronics Universal Frequency Converter units can be mounted side by side, horizontally and vertically, without air gap on a standard DIN rail, even at 70°C ambient temperature. All programming can be password protected. All terminals are over-voltage protected, polarity protected and short-circuit protected. The device is provided with field wiring terminals and shall be supplied from a power supply having double / reinforced. Insulation. a power switch should be easily accessible and close to the device. the power switch shall be marked as the disconnecting unit for the device.
