Tehnička dokumentacija
Tehnički podaci
Proizvođač
Renesas ElectronicsProduct Type
FIFO Memory
Organisation
512 x 9
Data Bus Width
9bit
Access Time
12ns
Mount Type
Surface
Minimum Supply Voltage
4.5V
Package Type
PDIP
Timing Type
Asynchronous
Maximum Supply Voltage
5.5V
Pin Count
28
Minimum Operating Temperature
-40°C
Bus Direction
Bi-Directional
Maximum Operating Temperature
85°C
Standards/Approvals
No
Width
7.62mm
Series
IDT7201LA
Height
2.79mm
Length
34.3mm
Automotive Standard
No
Number of Bits per Word
9
Supply Current
80mA
Zemlja podrijetla
Thailand
Detalji o proizvodu
The Renesas Electronics FIFO memory that loads and empties data on a first-in/first-out basis. The device uses Full and Empty flags to prevent data overflow and underflow. It has a retransmit capability that allows for reset of the read pointer to its initial position when RT is pulsed LOW. It is designed for those applications requiring asynchronous and simultaneous read/writes in multiprocessing and rate buffer applications.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 198,38
€ 14,17 komadno (u cijevi od 14) (bez PDV-a)
14
€ 198,38
€ 14,17 komadno (u cijevi od 14) (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
14
| količina | jedinična cijena | Po cijev |
|---|---|---|
| 14 - 14 | € 14,17 | € 198,38 |
| 28+ | € 14,05 | € 196,70 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Renesas ElectronicsProduct Type
FIFO Memory
Organisation
512 x 9
Data Bus Width
9bit
Access Time
12ns
Mount Type
Surface
Minimum Supply Voltage
4.5V
Package Type
PDIP
Timing Type
Asynchronous
Maximum Supply Voltage
5.5V
Pin Count
28
Minimum Operating Temperature
-40°C
Bus Direction
Bi-Directional
Maximum Operating Temperature
85°C
Standards/Approvals
No
Width
7.62mm
Series
IDT7201LA
Height
2.79mm
Length
34.3mm
Automotive Standard
No
Number of Bits per Word
9
Supply Current
80mA
Zemlja podrijetla
Thailand
Detalji o proizvodu
The Renesas Electronics FIFO memory that loads and empties data on a first-in/first-out basis. The device uses Full and Empty flags to prevent data overflow and underflow. It has a retransmit capability that allows for reset of the read pointer to its initial position when RT is pulsed LOW. It is designed for those applications requiring asynchronous and simultaneous read/writes in multiprocessing and rate buffer applications.