RS PRO Oscilloscope Probe, Differential Type, 50 MHz, BNC, USB Type B, Socket Connector
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Oscilloscope Probe
Probe Type
Differential
Bandwidth
50MHz
Maximum Common Mode Input Voltage
1.5kV
Connector Type
BNC, USB Type B, Socket
Number of Probes
1
Safety Category Level
CAT III, ARM Cortex, CAT II
Rise Time
5ns
Standards/Approvals
CE: EN500811 and 500821, IEC 10101
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro DC-50 MHz High Voltage Differential Probe RSDPB4080
RS Pro high-voltage differential probes are designed for the measurement of high-voltage differential signal, to meet the demand for floating measurement. The high bandwidth meets the demand for most measurement systems.
The probes are equipped with standard BNC input connectors. They can be used with any manufacturer oscilloscope (oscilloscope input impedance should set to 1 MΩ. When 50 Ω is selected, the attenuation multiply attenuates doubles) to test waveform of the tested circuits. There is an automatic save function, to prevent users reoperating in case of power supply drops. The probes have good capability of common mode noise suppression and can be widely used in the research and development, debugging or overhauling work for switching power supply, frequency converter, electronic ballast, frequency conversion electronic appliances and other electric power equipment.
Informacije o stanju skladišta trenutno nisu dostupne.
Cijena na upit
1
Cijena na upit
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Oscilloscope Probe
Probe Type
Differential
Bandwidth
50MHz
Maximum Common Mode Input Voltage
1.5kV
Connector Type
BNC, USB Type B, Socket
Number of Probes
1
Safety Category Level
CAT III, ARM Cortex, CAT II
Rise Time
5ns
Standards/Approvals
CE: EN500811 and 500821, IEC 10101
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro DC-50 MHz High Voltage Differential Probe RSDPB4080
RS Pro high-voltage differential probes are designed for the measurement of high-voltage differential signal, to meet the demand for floating measurement. The high bandwidth meets the demand for most measurement systems.
The probes are equipped with standard BNC input connectors. They can be used with any manufacturer oscilloscope (oscilloscope input impedance should set to 1 MΩ. When 50 Ω is selected, the attenuation multiply attenuates doubles) to test waveform of the tested circuits. There is an automatic save function, to prevent users reoperating in case of power supply drops. The probes have good capability of common mode noise suppression and can be widely used in the research and development, debugging or overhauling work for switching power supply, frequency converter, electronic ballast, frequency conversion electronic appliances and other electric power equipment.