RS PRO Process Pump Controller for Brushless Micropump, 28V, 6 V
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProCompatible Pump Type
Brushless Micropump
Product Type
Process Pump Controller
Supply Voltage
28, 6V
IP Rating
IP20
Maximum Output Pressure
10bar
Standards/Approvals
No
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 109,15
€ 109,15 komadno (bez PDV-a)
€ 136,44
€ 136,44 komadno (s PDV-om)
1
€ 109,15
€ 109,15 komadno (bez PDV-a)
€ 136,44
€ 136,44 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProCompatible Pump Type
Brushless Micropump
Product Type
Process Pump Controller
Supply Voltage
28, 6V
IP Rating
IP20
Maximum Output Pressure
10bar
Standards/Approvals
No
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.