Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Toggle Switch
Contact Configuration
SPDT
Switch Operation
On-On
Switch Contact Current
10A
Mount Type
PCB
Terminal Type
Solder
IP Rating
IP40
Illuminated
No
Actuator Length
40.5mm
Minimum Operating Temperature
-20°C
Contact AC Voltage
250V ac
Actuator Material
Plastic
Maximum Operating Temperature
55°C
Height
80.3mm
Length
28.89mm
Standards/Approvals
RoHS, UL & cUL
Width
14.44mm
Series
L7
Mechanical Life
10Cycles
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Introducing a range of SPDT toggle switches from RS PRO. These high-quality toggle switches offer a single pole double throw contact configuration, meaning one input terminal and two output terminals. A selection of 10A contact current ratings with various switch operations is available all with an operating temperature of -20°C to +55°C. RS PRO SPDT toggle switches are designed with screw or solder tab termination for PCB applications.
SPDT toggles are commonly used as a simple on-off switch or a changeover switch in a circuit. The on-off-on switching operation means they can be configured to connect a circuit to different paths for example; a circuit that has a light source and a motor can be connected to the outputs and activated with a flip of the toggle switch which controls the two output loads.
Prevent terminal oxidization on the switches by storing products in an environment that is dry and cool with relative humidity less than 90%.;Note: Prior to mounting products onto circuit board as well as for unused units, it is recommended to keep them within the sealed bag.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 9,47
€ 9,47 komadno (bez PDV-a)
€ 11,84
€ 11,84 komadno (s PDV-om)
1
€ 9,47
€ 9,47 komadno (bez PDV-a)
€ 11,84
€ 11,84 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 9 | € 9,47 |
| 10 - 49 | € 8,84 |
| 50 - 99 | € 8,09 |
| 100+ | € 7,19 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Toggle Switch
Contact Configuration
SPDT
Switch Operation
On-On
Switch Contact Current
10A
Mount Type
PCB
Terminal Type
Solder
IP Rating
IP40
Illuminated
No
Actuator Length
40.5mm
Minimum Operating Temperature
-20°C
Contact AC Voltage
250V ac
Actuator Material
Plastic
Maximum Operating Temperature
55°C
Height
80.3mm
Length
28.89mm
Standards/Approvals
RoHS, UL & cUL
Width
14.44mm
Series
L7
Mechanical Life
10Cycles
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Introducing a range of SPDT toggle switches from RS PRO. These high-quality toggle switches offer a single pole double throw contact configuration, meaning one input terminal and two output terminals. A selection of 10A contact current ratings with various switch operations is available all with an operating temperature of -20°C to +55°C. RS PRO SPDT toggle switches are designed with screw or solder tab termination for PCB applications.
SPDT toggles are commonly used as a simple on-off switch or a changeover switch in a circuit. The on-off-on switching operation means they can be configured to connect a circuit to different paths for example; a circuit that has a light source and a motor can be connected to the outputs and activated with a flip of the toggle switch which controls the two output loads.
Prevent terminal oxidization on the switches by storing products in an environment that is dry and cool with relative humidity less than 90%.;Note: Prior to mounting products onto circuit board as well as for unused units, it is recommended to keep them within the sealed bag.
