Tehnička dokumentacija
Tehnički podaci
Proizvođač
STMicroelectronicsProduct Type
Motor Controller
Motor Type
Stepper Motor
Configuration
Dual Bridge
Mount Type
Surface
Package Type
SO-20
Pin Count
20
Minimum Supply Voltage
4.5V
Maximum Supply Voltage
7V
Typical Switching Frequency
70kHz
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Length
13mm
Height
2.65mm
Standards/Approvals
RoHS
Width
7.6mm
Series
L6506
Supply Current
10mA
Automotive Standard
No
Zemlja podrijetla
Malaysia
Detalji o proizvodu
The STMicroelectronics Current controller designed to sense and control the current in stepping motors and similar devices. When used in conjunction with the L293, L298, L7150, L6114/L6115, the chip set forms a constant current drive for an inductive load and performs all the Interface function from the control logic through the power stage.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
Informacije o stanju skladišta trenutno nisu dostupne.
€ 9,18
€ 4,59 Each (Supplied as a Tape) (bez PDV-a)
Standard
2
€ 9,18
€ 4,59 Each (Supplied as a Tape) (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
Standard
2
| količina | jedinična cijena | Po traka |
|---|---|---|
| 2 - 18 | € 4,59 | € 9,18 |
| 20 - 98 | € 4,10 | € 8,20 |
| 100 - 198 | € 3,82 | € 7,64 |
| 200+ | € 3,41 | € 6,82 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
Tehnička dokumentacija
Tehnički podaci
Proizvođač
STMicroelectronicsProduct Type
Motor Controller
Motor Type
Stepper Motor
Configuration
Dual Bridge
Mount Type
Surface
Package Type
SO-20
Pin Count
20
Minimum Supply Voltage
4.5V
Maximum Supply Voltage
7V
Typical Switching Frequency
70kHz
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Length
13mm
Height
2.65mm
Standards/Approvals
RoHS
Width
7.6mm
Series
L6506
Supply Current
10mA
Automotive Standard
No
Zemlja podrijetla
Malaysia
Detalji o proizvodu
The STMicroelectronics Current controller designed to sense and control the current in stepping motors and similar devices. When used in conjunction with the L293, L298, L7150, L6114/L6115, the chip set forms a constant current drive for an inductive load and performs all the Interface function from the control logic through the power stage.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
