Tehnička dokumentacija
Tehnički podaci
Proizvođač
STMicroelectronicsProduct Type
LED Driver Evaluation Kit
LED Technology
LED Driver
Kit Classification
Evaluation Board
For Use With
Autumotive Lighting
Featured Device
ALED1642GW, STM8A
Kit Name
RGB LED Driver
Standards/Approvals
RoHS
Detalji o proizvodu
The STEVAL-ILL073V1 is a high brightness, RGB LED array driver system evaluation board with local dimming and diagnostics based on the ALED1642GW independent PWM LED driver controlled through an STM8A microcontroller SPI interface. A 16 RGB LED matrix is driven by three ALED1642GW LED drivers, one for each channel; i.e., Red, Green and Blue. The on-board A7986A DC-DC converter, accepting standard adapter input voltages, provides the voltages and power for the overall operation of the board. The STEVAL-ILL073V1 includes a USB-UART daughterboard bridge for communication with a PC.The evaluation board is also equipped with jumpers to simulate LED open circuit and LED short circuit faults, and a 4-pin SWIM connector to debug and to develop the STM8 microcontroller firmware.
Informacije o stanju skladišta trenutno nisu dostupne.
Cijena na upit
1
Cijena na upit
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
STMicroelectronicsProduct Type
LED Driver Evaluation Kit
LED Technology
LED Driver
Kit Classification
Evaluation Board
For Use With
Autumotive Lighting
Featured Device
ALED1642GW, STM8A
Kit Name
RGB LED Driver
Standards/Approvals
RoHS
Detalji o proizvodu
The STEVAL-ILL073V1 is a high brightness, RGB LED array driver system evaluation board with local dimming and diagnostics based on the ALED1642GW independent PWM LED driver controlled through an STM8A microcontroller SPI interface. A 16 RGB LED matrix is driven by three ALED1642GW LED drivers, one for each channel; i.e., Red, Green and Blue. The on-board A7986A DC-DC converter, accepting standard adapter input voltages, provides the voltages and power for the overall operation of the board. The STEVAL-ILL073V1 includes a USB-UART daughterboard bridge for communication with a PC.The evaluation board is also equipped with jumpers to simulate LED open circuit and LED short circuit faults, and a 4-pin SWIM connector to debug and to develop the STM8 microcontroller firmware.
