TE Connectivity End Cap PD Caps Black, Polyolefin, 12.7 mm
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
End Cap
Material
Polyolefin
Number of Breakouts
1
Shrink Temperature
125°C
Boja
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
110°C
Minimum Inside Diameter
2mm
Maximum Inside Diameter
12.7mm
Maximum Shrunk Diameter
2.29mm
Standards/Approvals
UL E85381
Adhesive Backing
No
Series
PD Caps
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
PD Heat Shrink Cap
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 46,00
€ 0,46 komadno (u pakiranju od 100) (bez PDV-a)
€ 57,50
€ 0,575 komadno (u pakiranju od 100) (s PDV-om)
100
€ 46,00
€ 0,46 komadno (u pakiranju od 100) (bez PDV-a)
€ 57,50
€ 0,575 komadno (u pakiranju od 100) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
100
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 100 - 1400 | € 0,46 | € 46,00 |
| 1500+ | € 0,44 | € 44,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
End Cap
Material
Polyolefin
Number of Breakouts
1
Shrink Temperature
125°C
Boja
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
110°C
Minimum Inside Diameter
2mm
Maximum Inside Diameter
12.7mm
Maximum Shrunk Diameter
2.29mm
Standards/Approvals
UL E85381
Adhesive Backing
No
Series
PD Caps
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
PD Heat Shrink Cap
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.