Tektronix THD Series THDP0100 Oscilloscope Probe, Differential Type, 100 MHz, 1:100, 1:1000, BNC Connector

Tektronix Oscilloscope Probes

The Tektronix differential high voltage oscilloscope has the largest differential dynamic range capability. It allows the user to safely measure up to ±6000V. The probe supports bandwidths up to 100MHz and slew rates up to 2500V/ns at 1/1000 gain. This probe is supplied with two sizes of hook tips and has an over-range visual and audible indicator that warns the user when they are exceeding the linear range of the probe.
Note:
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.
The THDP0100 can measure floating voltages up to 6000V safely. An over-range visual and audible indicator warns the user when the linear range of the probe is exceeded.

Features and Benefits

• Bandwidth is DC to 200MHz ;Attenuation ratio is 1:100 and 1:1000;Rise time is 3.5ns ;Input impedance is 40Mohmll2.5pF;Maximum common mode voltage is ±6000KV ;Maximum Input voltage is 2300V CAT I 1000V CAT III ;Typical CMRR DC: >-80dB/100 kHz: >-60dB/3.2 MHz: >-30dB/100 MHz: >-26dB;Overrange Indicator;Safety Certified;Switchable attenuation;Switchable bandwidth limit;Cable length 1.5 m

Applications

• High voltage differential probes are used for measuring voltage differences between two test points where neither test point is at ground. They can be found in:
• Floating measurements
• Switching power supply design
• Motor drive design
• Electronic ballast design
• CRT display design
• Power converter design and service
• Power device evaluation
• BNC interface (P5200A probes)
• TekVPI interface (TMDP and THDP Series probes)
• TekProbe interface

Certifications

• CE certified
• ISO certified
• CAT I 2300 V
• CAT III 1000 V

Supplied with

2 probe tips
2 large hook clips
2 small hook clips
2 probe heads