Time Electronics 7006 Loop Calibrator Battery
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Time ElectronicsProduct Type
Loop Calibrator
Accuracy
±0.1 %
Model Number
7006
Battery Type
PP3
Battery Life
40h
Power Source
Battery
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
50°C
Length
30mm
Weight
180g
Standards/Approvals
No
Width
65 mm
Height
140mm
Hazardous Area Certification
No
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual
Informacije o stanju skladišta trenutno nisu dostupne.
€ 526,43
€ 526,43 komadno (bez PDV-a)
€ 658,04
€ 658,04 komadno (s PDV-om)
Vrsta kalibracije
Bez umjeravanja
1
€ 526,43
€ 526,43 komadno (bez PDV-a)
€ 658,04
€ 658,04 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Vrsta kalibracije
Bez umjeravanja
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Time ElectronicsProduct Type
Loop Calibrator
Accuracy
±0.1 %
Model Number
7006
Battery Type
PP3
Battery Life
40h
Power Source
Battery
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
50°C
Length
30mm
Weight
180g
Standards/Approvals
No
Width
65 mm
Height
140mm
Hazardous Area Certification
No
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual