Tehnička dokumentacija
Tehnički podaci
Brand
M5StackProduct Type
Motor & Robotic Development Tool
Power Management Function
Motor Driver
For Use With
M5StickV, M5StickC, M5 Core
Kit Classification
Motor Driver Board
Featured Device
DRV8825PWPR, ATmega328P-AU
Kit Name
GRBL Module 13.2 Stepmotor Driver
Standards/Approvals
No
Zemlja podrijetla
China
Detalji o proizvodu
The M5Stack GRBL 13.2 is a three-axis stepper motor driver module in the M5Stack stacking module series. It uses an ATmega328P-AU controller with three sets of DRV8825PWPR stepper motor driver chip control ways, which can drive three bipolar steppers at the same time. Using the I2C communication interface (default address:0x70) and integrated DIP switch for adjusting motor step subdivision (maximum support of 1/32 step subdivision) and I2C address adjustment, You can achieve six-axis control by stacking two GRBL 13.2 modules. The power input interface is DC/9-24V, the motor drive current can reach 1.5A, and three sets of limit switch signal interfaces are open, which can be used to connect an external limit switch to realize the motor braking function. Suitable for a variety of stepping motor motion control scenarios, such as printers, robotic arms, etc.
Informacije o stanju skladišta trenutno nisu dostupne.
KM 73,89
KM 73,89 Each (bez PDV-a)
KM 86,45
KM 86,45 Each (s PDV-om)
1
KM 73,89
KM 73,89 Each (bez PDV-a)
KM 86,45
KM 86,45 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Brand
M5StackProduct Type
Motor & Robotic Development Tool
Power Management Function
Motor Driver
For Use With
M5StickV, M5StickC, M5 Core
Kit Classification
Motor Driver Board
Featured Device
DRV8825PWPR, ATmega328P-AU
Kit Name
GRBL Module 13.2 Stepmotor Driver
Standards/Approvals
No
Zemlja podrijetla
China
Detalji o proizvodu
The M5Stack GRBL 13.2 is a three-axis stepper motor driver module in the M5Stack stacking module series. It uses an ATmega328P-AU controller with three sets of DRV8825PWPR stepper motor driver chip control ways, which can drive three bipolar steppers at the same time. Using the I2C communication interface (default address:0x70) and integrated DIP switch for adjusting motor step subdivision (maximum support of 1/32 step subdivision) and I2C address adjustment, You can achieve six-axis control by stacking two GRBL 13.2 modules. The power input interface is DC/9-24V, the motor drive current can reach 1.5A, and three sets of limit switch signal interfaces are open, which can be used to connect an external limit switch to realize the motor braking function. Suitable for a variety of stepping motor motion control scenarios, such as printers, robotic arms, etc.
