Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsProduct Type
Display Driver
Maximum Output Power
100W
Input Voltage
10.5, 22.5V
Mount Type
Surface
Sub Type
LED Driver
Terminal Type
Solder
Operating Modes
Transition Mode
Driver Current
5.5mA
LED Voltage
0, 1.5V
Standards/Approvals
EN 61000-3-2
Series
HVLED007
Number of Outputs
5
Power Dissipation
0.65W
Zemlja podrijetla
Morocco
Detalji o proizvodu
The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range.The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well.
Informacije o stanju skladišta trenutno nisu dostupne.
KM 26.509,64
KM 10,604 Each (On a Reel of 2500) (bez PDV-a)
KM 31.016,28
KM 12,407 Each (On a Reel of 2500) (s PDV-om)
2500
KM 26.509,64
KM 10,604 Each (On a Reel of 2500) (bez PDV-a)
KM 31.016,28
KM 12,407 Each (On a Reel of 2500) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
2500
Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsProduct Type
Display Driver
Maximum Output Power
100W
Input Voltage
10.5, 22.5V
Mount Type
Surface
Sub Type
LED Driver
Terminal Type
Solder
Operating Modes
Transition Mode
Driver Current
5.5mA
LED Voltage
0, 1.5V
Standards/Approvals
EN 61000-3-2
Series
HVLED007
Number of Outputs
5
Power Dissipation
0.65W
Zemlja podrijetla
Morocco
Detalji o proizvodu
The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range.The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well.