Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsKit Name
Analogue Microphone Array Expansion
Detalji o proizvodu
The STEVAL-STWINMAV1 microphone array expansion adds advanced audio sensing capabilities to the STEVAL-STWINKT1B (and STEVAL-STWINKT1) SensorTile Wireless Industrial Node (STWIN) kit for high frequency vibration monitoring applications.
The board includes four low-power, high signal-to-noise ratio (SNR) MP23ABS1 capacitive sensing microphones, supported by a very low drop voltage, low quiescent current and low-noise voltage regulator ideal for batter-powered applications such as STWIN.
The expansion board is connected via a dedicated 12-pin connector to the core system board, which runs the STSW-STWINKT01 firmware with dedicated BSP drivers and application examples for you to test and develop vibration monitoring in the ultrasound frequency ranges.
•Analog microphone array expansion for STEVAL-STWINKT1B (and STEVAL-STWINKT1)
•Connects to STWIN core system board through dedicated 12-pin connector
•3 V to 5.5 V power supply input
•4 mm square-shaped differential microphone array
•4x MP23ABS1 high-performance, single-ended, analog, bottom-port MEMS microphones
•LDK130 300 mA low quiescent current very low noise LDO
•On-board audio-grade quad ADC
•Serial Audio Interface (SAI) digital output
Informacije o stanju skladišta trenutno nisu dostupne.
KM 66,49
KM 66,49 Each (bez PDV-a)
KM 77,79
KM 77,79 Each (s PDV-om)
1
KM 66,49
KM 66,49 Each (bez PDV-a)
KM 77,79
KM 77,79 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsKit Name
Analogue Microphone Array Expansion
Detalji o proizvodu
The STEVAL-STWINMAV1 microphone array expansion adds advanced audio sensing capabilities to the STEVAL-STWINKT1B (and STEVAL-STWINKT1) SensorTile Wireless Industrial Node (STWIN) kit for high frequency vibration monitoring applications.
The board includes four low-power, high signal-to-noise ratio (SNR) MP23ABS1 capacitive sensing microphones, supported by a very low drop voltage, low quiescent current and low-noise voltage regulator ideal for batter-powered applications such as STWIN.
The expansion board is connected via a dedicated 12-pin connector to the core system board, which runs the STSW-STWINKT01 firmware with dedicated BSP drivers and application examples for you to test and develop vibration monitoring in the ultrasound frequency ranges.
•Analog microphone array expansion for STEVAL-STWINKT1B (and STEVAL-STWINKT1)
•Connects to STWIN core system board through dedicated 12-pin connector
•3 V to 5.5 V power supply input
•4 mm square-shaped differential microphone array
•4x MP23ABS1 high-performance, single-ended, analog, bottom-port MEMS microphones
•LDK130 300 mA low quiescent current very low noise LDO
•On-board audio-grade quad ADC
•Serial Audio Interface (SAI) digital output
