FlexLink M5 T-Connector Connecting Component, Strut Profile 44 mm, 88 mm, Groove Size 11mm

RS kataloški broj:: 289-9026robna marka: FlexLinkProizvođački broj:: XCEC 12
brand-logo
Prikaži sve u Connecting Components

Tehnička dokumentacija

Tehnički podaci

Connector Type

T-Connector

Fits Groove Size

11mm

Fits Strut Profile

44 mm, 88 mm

Thread Size

M5

Material

Steel

Structural Element Type

Fixing & Connection Element

Product Family

FlexLink

Product System

XC

Zemlja podrijetla

Sweden

Detalji o proizvodu

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

€ 8,40

Each (bez PDV-a)

€ 9,83

Each (s PDV-om)

FlexLink M5 T-Connector Connecting Component, Strut Profile 44 mm, 88 mm, Groove Size 11mm

€ 8,40

Each (bez PDV-a)

€ 9,83

Each (s PDV-om)

FlexLink M5 T-Connector Connecting Component, Strut Profile 44 mm, 88 mm, Groove Size 11mm
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cijena
1 - 4€ 8,40
5+€ 8,20

Tehnička dokumentacija

Tehnički podaci

Connector Type

T-Connector

Fits Groove Size

11mm

Fits Strut Profile

44 mm, 88 mm

Thread Size

M5

Material

Steel

Structural Element Type

Fixing & Connection Element

Product Family

FlexLink

Product System

XC

Zemlja podrijetla

Sweden

Detalji o proizvodu

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.