Tehnička dokumentacija
Tehnički podaci
Brand
MolexSeries
MICRO-LATCH
Pitch
2.0mm
Number Of Contacts
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Mounting Type
Through Hole
Connector System
Wire to Board
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
2.0A
Series Number
53254
Voltage Rating
125.0 V
Zemlja podrijetla
Malaysia
Detalji o proizvodu
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 4,40
€ 0,44 Each (In a Pack of 10) (bez PDV-a)
€ 5,15
€ 0,515 Each (In a Pack of 10) (s PDV-om)
Standard
10
€ 4,40
€ 0,44 Each (In a Pack of 10) (bez PDV-a)
€ 5,15
€ 0,515 Each (In a Pack of 10) (s PDV-om)
Standard
10
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
10 - 240 | € 0,44 | € 4,40 |
250 - 990 | € 0,39 | € 3,90 |
1000+ | € 0,33 | € 3,30 |
Tehnička dokumentacija
Tehnički podaci
Brand
MolexSeries
MICRO-LATCH
Pitch
2.0mm
Number Of Contacts
8
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Mounting Type
Through Hole
Connector System
Wire to Board
Termination Method
Solder
Contact Plating
Tin
Contact Material
Brass
Current Rating
2.0A
Series Number
53254
Voltage Rating
125.0 V
Zemlja podrijetla
Malaysia
Detalji o proizvodu
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.