Tehnička dokumentacija
Tehnički podaci
Brand
RS ProCompatible Battery Size
AAA
Product Type
Battery Holder
Number of Cells
2
Sub Type
Battery Holder
Mount Type
Chassis
Body Material
Polypropylene
Termination Type
Coil Spring
Length
52.3mm
Standards/Approvals
No
Width
24.7mm
Height
13mm
Diameter
10.1mm
Series
SN
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 2,13
€ 2,13 Each (bez PDV-a)
€ 2,49
€ 2,49 Each (s PDV-om)
1
€ 2,13
€ 2,13 Each (bez PDV-a)
€ 2,49
€ 2,49 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProCompatible Battery Size
AAA
Product Type
Battery Holder
Number of Cells
2
Sub Type
Battery Holder
Mount Type
Chassis
Body Material
Polypropylene
Termination Type
Coil Spring
Length
52.3mm
Standards/Approvals
No
Width
24.7mm
Height
13mm
Diameter
10.1mm
Series
SN
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
