
Tehnička dokumentacija
Tehnički podaci
Proizvođač
DuracellProduct Type
Button Battery
Battery Size
PR70
Chemistry
Zinc Air
Nominal Voltage
1.4V
Battery Capacity
95mAh
Diameter
5.8mm
Number of Batteries
6
Termination Type
Flat
Height
3.6mm
Weight
300mg
Standards/Approvals
ANSI, IEC
IEC Code
PR70
Series
Duracell EasyTab
Detalji o proizvodu
This button battery supplies low-voltage power for Compact electronic devices using zinc-air chemistry. It operates within typical ambient temperatures for consumer use and is designed for applications requiring a stable 1.4V nominal output and flat termination contacts. The pack contains six cells and meets recognised ANSI and IEC standards for this size and chemistry.
Delivered capacity varies with applied load, temperature and cut-off voltage and is specified as 95mAh measured to 1.1V at a defined test condition.
The typical internal impedance is 16ohm at 1kHz which influences voltage stability during discharge and suitability for low-drain loads.
The cell measures 5.8mm diameter and 3.6mm height, with flat terminals for contact surfaces.
The recommended ambient range for operation is 0°C to 50°C.
The pack contains six batteries.
Keep button batteries out of the reach of children. Consult a doctor immediately if ingested.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 790,38
€ 131,73 komadno (u pakiranju od 6) (bez PDV-a)
6
€ 790,38
€ 131,73 komadno (u pakiranju od 6) (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
6
Tehnička dokumentacija
Tehnički podaci
Proizvođač
DuracellProduct Type
Button Battery
Battery Size
PR70
Chemistry
Zinc Air
Nominal Voltage
1.4V
Battery Capacity
95mAh
Diameter
5.8mm
Number of Batteries
6
Termination Type
Flat
Height
3.6mm
Weight
300mg
Standards/Approvals
ANSI, IEC
IEC Code
PR70
Series
Duracell EasyTab
Detalji o proizvodu
This button battery supplies low-voltage power for Compact electronic devices using zinc-air chemistry. It operates within typical ambient temperatures for consumer use and is designed for applications requiring a stable 1.4V nominal output and flat termination contacts. The pack contains six cells and meets recognised ANSI and IEC standards for this size and chemistry.
Delivered capacity varies with applied load, temperature and cut-off voltage and is specified as 95mAh measured to 1.1V at a defined test condition.
The typical internal impedance is 16ohm at 1kHz which influences voltage stability during discharge and suitability for low-drain loads.
The cell measures 5.8mm diameter and 3.6mm height, with flat terminals for contact surfaces.
The recommended ambient range for operation is 0°C to 50°C.
The pack contains six batteries.
Keep button batteries out of the reach of children. Consult a doctor immediately if ingested.