Pico Technology PicoConnect Series 441 Oscilloscope Probe, Differential Type, 15MHz, 1:1, D9 Connector Connector
Tehnička dokumentacija
Tehnički podaci
Brand
pico TechnologyProbe Type
Differential
Attenuation
1:1
Bandwidth
15MHz
Connector Type
D9 Connector
Model Number p
441
Number of Probes
1
Series
PicoConnect
Safety Category
CAT III 1000V
Detalji o proizvodu
PicoConnect 441 1:1 Differential Probe
The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth, for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana leads, so is compatible with a wide range of test probes. It comes with a pair of sprung hook probes.
This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.
Pico PC Based Instruments
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 9.602
Each (bez PDV-a)
RSD 11.522
Each (s PDV-om)
1
RSD 9.602
Each (bez PDV-a)
RSD 11.522
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
pico TechnologyProbe Type
Differential
Attenuation
1:1
Bandwidth
15MHz
Connector Type
D9 Connector
Model Number p
441
Number of Probes
1
Series
PicoConnect
Safety Category
CAT III 1000V
Detalji o proizvodu
PicoConnect 441 1:1 Differential Probe
The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth, for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana leads, so is compatible with a wide range of test probes. It comes with a pair of sprung hook probes.
This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.